Product Details
- Available Certified ISO Grade Designs: ISO 5, ISO 6, ISO 7, ISO 8
- Performance Data and Submittals
- Fully Welded & Leak Tested Design: All stainless steel filter housing is full-seam welded and factory leak-tested to meet ISO 14644-3 standards.
- Ships in 120V configuration. Can be easily be reconfigured to 230V
- Ultra-Low Particulate Air (ULPA) Filter: 99.999% efficient at 0.12µm particle diameter
- All-304 stainless steel BioSafe® housing, baffle plate, filter face grille, filter frame and impeller ensure optimal cleanliness and stand up to alcohol and other cleaning agents
- Electronically commutated (EC) brushless motor with internal microprocessor
- EC motor offers high performance, low energy consumption & low noise levels (40 dB)
- Can be incorporated into Building Management Systems (BMS) to allow remote monitoring and control
- MODBUS® networking control card with closed-loop control capability that supports air pressure, air flow, and particle count sensors
- Motor control panel includes diagnostic indicator lights, manual speed adjustment, test probe jacks, CAT5e ports, control mode switch, and MODBUS® address DIP switch bank
- Room-Side Replaceable (RSR) design allows quick filter replacement from the inside of the cleanroom. Because it eliminates the need for roof access or breaching the cleanroom, an RSR model greatly reduces maintenance time and costs.
- Gel-sealed filter seats securely against a knife-edge on the fan housing
- Easy-open clips allow fast filter replacement from the room side without breaching the cleanroom ceiling
- Filter shipped uninstalled to prevent shifting in the mounting gel that could cause leaks.
- FDA-approved silicone sealant
- Internal baffling plate and diffuser panel provide quiet uniform air flow across the filter face
- 1/4-20 UNC threaded inserts on corners to allow suspension by guy-wires
- MERV 7 pre-filter, 30% ASHRAE rated
- Low-profile design is ideal for cleanrooms with limited ceiling space
- Removable yellow power cord with 4-pin connector for easy installation to Terra cleanrooms (connector may be used with an optional wall plug adapter; or may be removed entirely to hard-wire the FFU)
- See performance data and submittal sheets for additional information
- Optional Accessories:
- Challenge port kit
- Power plug adapter
- Stainless surface mount frame for installing FFU in ceiling without T-grid
- 12" ducted inlet connection adapter
- Replacement filter
- Filter replacement alarm
- Eye bolt package
- Ionizing bar
- Pre-filter safety cover, for CE conformance
- Control panel with night mode switch and power distribution modules
- All filter sales are final; returns for this item cannot be accepted
Specs
• Type: Smart® ECM, RSR
• Material: Stainless Steel
• Filter Replacement Access: Room-Side
• Size: 2'x4'
• Filter Frame Material: 304 Stainless Steel
• Filter: ULPA
• Motor Type: Electronically Commutated (EC)
• Motor HP: 1/3 hp
• Airflow: Positive Pressure
• Speed Control: Variable Speed Control Card
• Blower Type: Forward Curved
• Active Filter Face Area: 7.2 ft²
• Pre-Filter: MERV 7
• RoHS: Compliant
• Unit of Measure: EA
• Marks & Listings: CE, ULC
• Electrical Specifications: 120/230 V, 4.1 A, 2.8 W, 1 Ph, 50/60 Hz
• Weight, Product: 71 lb
• Dimensions, Product: 23.63" W x 47.63" D x 15" H
• Weight, Shipping: 91 lb
• Dimensions, Shipping: 53" W x 53" D x 20" H
• Package Type: Palletized
