Product Details
- Available Certified ISO Grade Designs: ISO 5, ISO 6, ISO 7, ISO 8
- Performance Data and Submittals
- Includes FDA-approved silicone sealant (specify acrylic urethane or other required sealant type when FFU is ordered)
- ULPA Filter: 99.999% efficient Ultra-Low Penetration Air, rated at particles 0.12µm diameter, shipped uninstalled to prevent damage during shipping
- All wiring embedded in filled, rigid conduit in accordance with Class I/II requirements
- Motor: 1 Speed direct-drive, 0.25HP, 1140 RPM, fan-cooled
- Proper installation of explosion proof equipment is critical to maintaining the explosion-proof protection aspects of the system.
- Customer must hard wire the motor/ffu in correlation to their specified voltage at time of installation
- Therefore all wiring for explosion proof systems should be done in the field per local code by a licensed electrician.
- Explosion-proof motor meets NEC requirement for Class I Group C and D, Class II Group F and G, Division 1 hazardous locations
- All-304 stainless steel BioSafe® housing, baffle plate, filter face grille, filter frame and impeller ensure optimal cleanliness and stand up to alcohol and other cleaning agents
- Internal baffling plate and diffuser panel provide quiet uniform air flow across the filter face
- 1/4-20 UNC threaded inserts on corners to allow suspension by guy-wires
- MERV 7 pre-filter, 30% ASHRAE rated
- Filters are leak tested in accordance with IEST standards and meet UL 900
- See performance data and submittal sheets for additional information
- Optional Accessories:
- Challenge port kit
- Stainless surface mount frame for installing FFU in ceiling without T-grid
- 12" ducted inlet connection adapter
- Replacement filter
- Eye bolt package
- Pre-filter safety cover, for CE conformance
- All filter sales are final; returns for this item cannot be accepted
Specs
• Type: Explosion-Proof
• Material: Stainless Steel
• Filter Replacement Access: Top Side
• Size: 2'x3'
• Filter Frame Material: 304 Stainless Steel
• Filter: ULPA
• Motor Type: Permanent Split capacitor (PSC)
• Airflow: Positive Pressure
• Special Application: Explosion-Proof
• Certified ISO Grade Design: ISO 5
• ISO Rated Air Cleanliness: ISO 4
• Unit of Measure: EA
• Marks & Listings: UL, ULC
• Electrical Specifications: 120/240 V, 6.8 A, 816 W, 60 Hz
• Weight, Product: 53 Lbs
• Dimensions, Product: 23.72" W x 35.63" D x 19.86" H
• Weight, Shipping: 73 lb
• Dimensions, Shipping: 53"W x 53"D x 20"H
• Package Type: Palletized
