Product Details
- ADA compliant 6’ Purifier Axiom C1 BSC with OmniFlex Type A2 and B2 modes
- For Biosafety Level (BSL) 1, 2, and 3 containment or BSL 4 with PPE
- Intuitive MyLogic Operating System shows clear status information on LCD display
- Chem-Zone work surface provides operator safety when working with hazardous vapors
- • Included: built-in options: UV light, service fixture and Vacu-pass; required base stand sold separately
- Exhaust Volume for 8" sash height: 556 CFM @ 0.15" w.g
- Nominal inflow velocity of 105 feet per minute (fpm) (0.53 m/sec)
- Nominal downflow velocity: 65 fpm (0.33 m/sec) for 4' models; 55 fpm (0.28 m/sec) for 6' models
- Maximum sash opening height: 22.6" (58 cm)
- Viewing height: 27.0" (69 cm)
- Conformance: NSF/ANSI Standard 49 Listed; ADA-compliant operation UL Standard 61010-1; ISO 5 conditions per ISO 14644-1 and 2; CAN/CSA 22.2 No. 61010-1; CE Conformity Marking (230V models)
- Type A mode for routine microbiological applications and cell culture work
- Type B mode for handling hazardous chemicals
- Filters hazardous aerosols and particulates for personnel, product and environmental protection
- Included connection discharges HEPA filtered exhaust air directly back to the lab
- Sash design: 10° angled fully-closing, 1/4" tempered safety glass sash with counterbalanced, anti-racking and easy-to-lift mechanism
- Material: 304 stainless steel work surface, leak-tight stainless steel interior, powder-coated steel exterior, safety glass sash, NSF-Approved, powder-coated steel non-welded (base stand)
- Exclusive Labconco features of Purifier Axiom C1 BSC:
- Omni-Flex™ two mode design for Type A and Type B modes
- MyLogic™ Operating System
- LCD information system: Smart-Start™, Night-Smart™, Filter Life Remaining" bar graph for each HEPA filter, status line alarm and alerts when filter life diminishes to 20% and 0%
- Chem-Zone™ work surface with a dedicated direct exhaust for use with hazardous vapors or radionuclides
- Fully scannable 99.99+% supply and exhaust HEPA filters (99.999% ULPA filters option available)
- Dual Electronically Commutated Motors (ECM)
- Constant Airflow Profile™ (CAP) Technology airflow monitoring system
- Active Protection Protocol prevents flow of air into the lab by operating exhaust blowers for up to five minutes, in the event of exhaust system failure
- Enhanced containment with Air-Wave™ Entry System and Contain-Air™ Negative Pressure Channel
- Two electrical duplex receptacles and touchpad positioned on right side
- Reserve-Air™ Secondary Airflow Slots* on curved waterfall design stainless steel inlet grille
- Removable 3-piece work surface (304 stainless steel)
- Additional benefits: Low static pressure and volumetric rate exhaust requirements in Type B mode (no need for dedicated exhaust system), safe negative pressure design, glare-free LED lighting (located outside contaminated work area), bright 0-150 footcandle, Interval/elapsed timer for experiment monitoring, electronic security lock with access code(optional activation),
- Options:
- NSF-Approved, powder-coated steel non-welded telescoping base stand with feet (unassembled)
- Accessory Package: UV lamp (254 nm), service fixture(s) with ball-type valve(s) and Vacu-Pass™ Cord & Cable Portal
- Type B mode: 10" diameter stainless steel manual damper
- Bag-In/Bag-Out Package: Exhaust Filter for use with radionuclides or harmful chemicals
Specs
• Model: Purifier Axiom
• Width: 72"
• Biosafety Class: Class II C1
• UV Lamp: Included
• Base Stand: Optional
• Manufactured by: Labconco
• Sash Opening: 8"
• Manufacturer SKU: 304681001
• Unit of Measure: EA
• Marks & Listings: UL, NSF 49
• Electrical Specifications: 110/115 V, 16 A, 455 W, 50/60 Hz
• Weight, Product: 955 lb
• Dimensions, Product: 78.3" W x 32.7" D x 64.2" H
• Weight, Shipping: 1,075 lb
• Dimensions, Shipping: 86" W x 44" D x 79.2" H
• Package Type: Skeletal Crating