Product Details
- Available Certified ISO Grade™ Designs: ISO 6, ISO 7, ISO 8
- Performance Data and Submittals
- Customer must determine if filter system leakage testing is required for their application. This unit is not full seam welded. If a leak test is required, full seam welded units leak-tested to meet ISO 14644-3 are optionally available.
- High-performance LED Lighting is built into the laminar flow diffuser for applications that require total or near-total FFU ceiling coverage
- Integrated ionizers provide a continuous stream of static-neutralizing ions to protect sensitive materials against ESD
- Built-in ionizers enhance cleanliness by neutralizing charges that attract and hold particles on wall, tabletops and other surfaces
- State-of-the-art technology guarantees intrinsically balanced ionization
- Requires no calibration—automatically maintains ion balance of ± 50 volts
- Discharge times directly under the Bar average 28 seconds (from ± 1,000 volts to 50 volts, measured in a 4-foot (1219 mm) laminar flow hood in accordance with Ionization Standard ANSI ESO/ESD S3.1 of the ESD Association).
- High Efficiency Particulate Air (HEPA) Filter: 99.99% efficient at 0.3µm particle diameter
- AC 3-speed blower motor
- FDA-approved silicone sealant
- Internal baffling plate and diffuser panel provide quiet uniform air flow across the filter face
- 1/4-20 UNC threaded inserts on corners to allow suspension by guy-wires
- MERV 7 pre-filter, 30% ASHRAE rated
- Low-profile design is ideal for cleanrooms with limited ceiling space
- Removable yellow power cord with 4-pin connector for easy installation to Terra cleanrooms (connector may be used with an optional wall plug adapter; or may be removed entirely to hard-wire the FFU)
- Filters are leak tested in accordance with IEST standards and meet UL 900
- See performance data and submittal sheets for additional information
- Optional Accessories:
- Challenge port kit
- Power plug adapter
- Stainless surface mount frame for installing FFU in ceiling without T-grid
- 12" ducted inlet connection adapter
- Replacement filter
- Filter replacement alarm
- Eye bolt package
- Ionizing bar
- Pre-filter safety cover, for CE conformance
- Control panel with night mode switch and power distribution modules
- All filter sales are final; returns for this item cannot be accepted
Specs
• Material: Powder-Coated Steel
• Filter Replacement Access: Room-Side
• Size: 2'x4'
• Filter Frame Material: Aluminum
• Filter: HEPA
• Motor Type: Permanent Split capacitor (PSC)
• Airflow: Positive Pressure
• Special Application: Built-In LED + Ionizers
• Configuration: Integrated LED and Ionizer
• Certified ISO Grade™ Design: ISO 6
• ISO Rated™ Air Cleanliness: ISO 5
• Unit of Measure: EA
• Electrical Specifications: 120 V
• Package Type: Palletized
