Product Details
- Working Time @ 77°F (25°C): 3-5 minutes
- Purge Time @ 77°F (25°C): 2-3 minutes
- Time to Handling Strength @ 77°F (25°C): 60 minutes
- Shelf Life/Storage: Shelf life is eighteen (18) months from date of shipment when stored in a clean, dry environment at 50-80°F (10-27°C) in original, unopened container. After opening, protect sealant from excessive exposure to moisture by installing desiccant cartridges and/or using dry nitrogen as an inert cover. DO NOT FREEZE
- Seam sealant provides trim-free seams, expands and contracts to accommodate temperature-induced dimensional changes without cracks or gaps
- Seam Sealant is an equal-mix, two-component bright white urethane sealant system used to bond and seal a variety of plastics and prepared metals.
- For corner, windows, doors and any other non-linear seams
- For Inline/centerline inline/centerline seams: Covers 132 linear feet per cartridge.
- Sealant will cure to full strength in 24 hours at room temperature, 77°F (25°C).
- Due to dual application process, double chambered caulk gun required for use
- NON-FLAMMABLE | Does not require explosion-proof equipment.
- ENVIRONMENTALLY FRIENDLY | VOC compliant; does not contain ozone depleting chemicals.
- ENVIRONMENTALLY RESISTANT | Resists sunlight, weathering, humidity and salt spray.
- CHEMICALLY RESISTANT | Solvent resistant when cured. Painting and most cleaning processes do not affect bond strength.
- NON-SAG | Remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.
- FAST CURE | Paintable within 10 minutes, reducing set up time and overall process time. Handling strength for bonded assemblies develops within 60 minutes.
Specs
• Type: Seam Sealant
• Unit of Measure: EA
