IKA T 10 basic ULTRA-TURRAX
Specifications for T 10 basic ULTRA-TURRAX® Dispension Unit
- Motor rating input/output: 125W/75W
- Volume range min/max: 0.5 to 100 ml (H2O)
- Viscosity maximum: 5000 mPAS
- Speed range: Stepless
- Speed control: Stepless
- Speed variation on load change: <6%
- Noise without element: 65 dB(A)
- Extension arm diameter: 8 mm
- Extension arm length: 100 mm
- Process type: batch
- Permitted ON time: 10 minutes
- Power OFF time after on: 5 minutes
- Overload/blocking protection: Locking bimetallic switch; temperature and power sensitivity
- Dimensions: (W x D x H) 2.20 x 7.01 x 2.59 in. (56 x 178 x 66 mm)
- Clamp arm dimension: (Ø x L) 0.315 x 3.94 in. (8 x 100 mm)
- Weight: 1.10 lbs. [0.5 kg]
- Permissible ambient temperature: 5°C to 40°C
- Permissible relative humidity: 80%
- Protection class per DIN EN 60529: IP 30
- Contamination level: 2
- Protection class: II
- Overvoltage category: II
- Operation at a terrestrial altitude Maximum 2000 m above sea level
- Voltage: 115V; 230V also available; contact us for details
- Frequency: 50/60 Hz
- Power input/output: 125W/75W
| Adjusting wheel scale | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|
| No-load speed [RPM] | 8,000 | 9,500 | 11,500 | 14,500 | 20,500 | 30,000 |
| Speed in 5 ml water [RPM] | 7,500 | 9,400 | 11,400 | 14,400 | 20,400 | 29,900 |
| Speed Control Table for T 10 Dispersion Unit | ||||||
| Calculations in speed table based on a dispersion of 5 ml water using dispersing tool S 10 N-5G. Speeds will vary depending on dispersing tool used. Speed is dependent on the dispersion element used, viscosity of the medium, and its volume | ||||||
