Learn More: Benefits of Copper and SS Chambers
Features of HERAcell 150i and 240i CO2 Direct Heat Incubators with Copper and Stainless Steel Chambers
Designed to provide optimal growth conditions to enhance cell growth, the HERAcell 150i and 240i CO2 Incubators have a range of features for accurate, uniform and reliable culturing conditions. Units are available with thermal conductivity or infrared sensors, located inside the chamber, for precise environmental measurements. The fan-assisted convection provides samples with a uniform temperature, CO2 and humidity within the incubator. Because constant humidity is paramount for cell protection and optimal growth, the patented floor heating system directly transfers heat to the humidity reservoir for optimal humidity and allows for rapid recovery of moisture levels after doors are opened. The water level sensor alarms when later levels are low and the iCAN touchscreen clearly displays performance trends of your culturing process and monitors the progress of the ContraCon decontamination routine. Designed with a pan-less system to reduce handling, recovery rates are up to five times faster than standard tray humidified incubators.
The ContraCon 90°C moist heat decontamination cycle eliminates variability in disinfection. It eliminates disassembly of sensors, hardware and other components. This feature is effective against:
The tarnishing effects on copper increase with age thus increasing the antimicrobial efficiency. Because copper ions are not airborne, they do not effect or interfere with the integrity of cultures.
Since copper is easy to clean, maintenance is minimal and eliminates the need to use toxic chemical cleaners or UV light.
The ContraCon 90°C moist heat decontamination cycle eliminates variability in disinfection. It eliminates disassembly of sensors, hardware and other components. This feature is effective against:
- Bacillus subtilis
- Bacillus stearothermophilus (USP 23)
- Enterococcus faecalis
- Escherichia coli
- Pseudomonas aeruginosa
- Staphylococcus epidermidis
- Corynebacterium xerosis
- Aspergillums niger
Benefits of Copper Inner Chamber in HERAcell 150i and 240i CO2 Incubators
Copper has a natural antimicrobial feature that delivers non-stop bactericidal and fungicidal protection to samples on contact. As the choice of many cell culture professionals, copper maximizes productivity and minimizes contamination especially in shared-use environments.The tarnishing effects on copper increase with age thus increasing the antimicrobial efficiency. Because copper ions are not airborne, they do not effect or interfere with the integrity of cultures.
Since copper is easy to clean, maintenance is minimal and eliminates the need to use toxic chemical cleaners or UV light.
| Model | HERAcell 1501 | HERAcell 240i |
|---|---|---|
| Exterior Dimensions W x D x H | 25.1 x 30.8 x 24.1 in. (638 x 782 x 612 mm) | 30.7 x 32.8 x 36.8 in. (780 x 833 x 935 mm) |
| Interior Dimensions W x D x H | 18.5 x 20.9 x 23.9 in. (470 x 531 x 607 mm) | 23.9 x 23.0 x 26.4 in. (607 x 584 x 671) |
| Internal Volume | 150L (5.3 cu. ft.) | 240 (8.4 cu. ft.) |
| Weight | 154 lbs. (70 kg) | 178 lbs. (81 kg) |
| Shelves Dimensions W x D | 16.7 x 18.3 in. (423 x 465 mm) | 22.0 x 19.7 (560 x 500 mm) |
| No. of Shelves Standard/Maximum | 3 Standard 10 Maximum | 3 Standard 12 Maximum |
| Max. Load per Shelf | 22 lbs. (10 kg) | |
| Total Load per Shelf | 66 lbs. (30 kg) | |
| Shelves Half Width W x D | — | 10.2 x 19.7 in. (260 x 500 mm) |
| No. of Shelves Standard/Maximum | — | 6 Standard 16 Maximum |
| Max. Load per Shelf | — | 11 lbs. (5 kg) |
| Total Load per Shelf | — | 66 lbs. (11 kg) |
| Interior Chamber | Solid Copper/Stainless Steel | |
| Shelves and Fan Impeller | Solid Copper/Stainless Steel | |
| ContraCon decontamination routine | verified by accredited laboratories | |
| Decontamination phase, on all surfaces °C/hrs. | 90/9 | |
| Period (ambient temperature 20°C) | 25 hours | |
| Efficiency spectrum | bacteria, fungi, spores (USP 23), mycoplasma | |
| Temperature | Air Jacket Temperature Control | |
| Temperature Control Range °C | TA* +3 … 55 | |
| Temperature deviation, time**/spatial** | ± 0.1/± 0.5 K | |
| Ambient temperature range °C | +18 … 33 | |
| Constant humidity*** %rH | 95 ± 3 | |
| Fill amount/water quality | Max. 3 distilled/autoclaved and demineralized | Max 4.5 distilled/autoclaved and demineralized |
| Measure and control range Vol. – % | 0 … 20 | |
| Control accuracy Vol. – % | ± 0.1 | |
| Inlet pressure bar | 0.8 … max. 1 | |
| Gas purity % | 99.5, medical quality min. | |
| Measure and control range Vol. – % | 1..21/5..90 | |
| Control accuracy Vol. – % | ±0.2 | |
| Inlet pressure bar | 0.8…max. 1 | |
| Gas purity % | 99.5; medical quality min. | |
| Rated voltage V | 1/N/PE AC; 230 (120) | |
| Rated output kW | 0.58 (0.62) | 0.64 (0.65) |
| Rated frequency Hz | 50/60 | |
| Heat emission to environment at 37°C kWh/h | 0.06 | 0.07 |
| With ContraCon, kWh/h | 0.11 | 0.25 |
| *Ambient Temperature **Determined according to DIN 12880 for the standard configuration. Refer to calibration instructions for details. ***Relative humidity inside incubator may increase during incubation of open culture vessels | ||
