Learn More: Labconco Protector HEPA-Filtered Glove Boxes
Additional Features of Precise HEPA-Filtered Glove Boxes with Polyethylene Liner
- Clean-up time: 0.05 ppm average tracer gas levels or less detected during perimeter scan testing (surpasses ASHRAE 110 standards) after 5 minute dilution Test port for testing HEPA or ULPA filter integrity Filter removal and replacement: True Bag-In/Bag-Out Filter Disposal System
- LCD display: real time monitoring of volume dilution rates in cubic feet per minute (CFM), air changes/minute (ACM), and main chamber pressure (inches of water). Chamber transfer doors pivot upward (counterbalanced and equipped with quick-latches)
- Interior right-hand side wall-mounted pass-through plug for on-site installation of an optional accessory: electrical outlet, RS-232 port, gas/liquid port, or port for oxygen or moisture monitor
- Pair of neoprene gloves, 0.015” thick, 30” long, size 9 ¾
- Switches for light, blower and electrical duplex
- Two 8” ID, epoxy-coated aluminum double-grooved glove ports mounted 17” apart, with neoprene gaskets
- Two 25-watt fluorescent lights that exceed 100 footcandles
Fiberglass and Stainless Steel Liners
Chemical-resistant fiberglass-lined models feature inlet and outlet HEPA filters that have a 99.99% efficiency rate on particulates 0.3 microns or larger. Models are composed of a one-piece molded fiberglass liner. There are clear acrylic inner and outer transfer chamber doors for convenient viewing of materials in the glove box.
Stainless steel-lined models utilize inlet and outlet ULPA filters. These glove boxes have an efficiency of 99.999% on particulates that are 0.12 microns or larger. This model has Type 304 stainless steel liners, Type 304 stainless steel inner and outer transfer chamber doors, and the front panel is also comprised of Type 304 stainless steel.