- Available Certified ISO Grade Designs: ISO 5, ISO 6, ISO 7, ISO 8
• Certified ISO Grade Design: ISO 5
• Unit of Measure: of 1
• Certified ISO Grade Design: ISO 5
• Unit of Measure: of 1
These protective garments are designed for limited use—they are durable enough to be used more than once, yet inexpensive enough to be economically discarded, thus saving you the time and cost of laundering.
The key feature of our protective garments is the material used in their construction. Non-woven Tyvek used in IsoClean garments is a highly effective contamination control fabric resistant to penetration by airborne particles, dirt, grease, biological agents and a broad range of chemicals. It is chemically and biologically inert, low linting and static dissipative.
The ProShield 2 non-woven material used in ProClean®garments features an outside polypropylene film lamination that provides an excellent protective shield, holding in 100% of all dry particulates down to 0.19 µm in size, while remaining breathable for additional worker comfort. This unique material provides the contamination protection associated with much more expensive, reusable garments. Like the IsoClean fabric, it is chemically and biologically inert, low linting and static-dissipative.
Tunnelized elastic at openings enhances particle containment by a secure fit and reduces the lint associated with exposed elastic. Tapered torso minimizes the "billowing effect" that can cause particulation. Rotated shoulders and curved back design improves comfort and allows easy movement when arms are outstretched. Extended sleeve and leg lengths minimize the potential for skin exposure.
Two seam options allow you to optimize your cost and containment needs. ProClean garments come with serged seams. IsoClean garments come with serged or bound seams. Both the Serged Seam and Bound Seam offer assured sterility with proper processing. You can order your garments uncleaned, cleaned, sterile, or cleaned and sterile.
Physical Property | Test Method | Imperial Results | Metric Results | Test Method (European) | Results (European) | ||
---|---|---|---|---|---|---|---|
Basis Weight | ASTM D751 | 0.06 kg/m2 | 58 g/m2 | BS2471 | 61 g/m2 | ||
Grab Tensile Strength | ASTM D751 | MD 30 lbs (13.6 kg) XD 26 lbs (11.7 kg) | MD 133 N XD 115 N | ISO 5081 | MD 98 N XD 80 N | ||
Puncture Propagation Tear | ASTM D2582 | MD 6.4 lbs (2.9 kg) XD 9.3 lbs (4.2 kg) | MD 29 N XD 41 N | EN 863 | 7.8 N | ||
Ball Burst | ASTM D3787 | 26 lbs (11.7 kg) | 115 N | -- | -- | ||
Burst Resistance | -- | -- | -- | ISO 2960 | 61 Kpa | ||
Hydrostatic Water Resistance | ASTM D751 | 17.7 psi | 122 cm | ASTM D751 | 169 cm | ||
Moisture Vapor Transmission Rate (g/m2/24 hrs) | ASTM E-96 Procedure D | 1481.5 | 1481.5 | ASTM E-96 Procedure D | 1481.5 | ||
MD = Machine Direction; XD = Cross Direction. The test data presented here represent typical physical properties. Sources for all test data are from independent laboratories. All tests were performed under laboratory conditions and not under actual use conditions. Tests were performed on material samples, not actual garments. |
On a tight schedule? Choose FasTrak 24/7 Priority Service to help meet your critical schedule for Terra-manufactured products, either before or after your order is placed.*
Call for pricing. FasTrak service fees cover costs of additional services only, without additional profit.
* Terra's FasTrak services limited guarantee: to ship on the ESD or date specified OR to refund up to 100% of FasTrak charges. This guarantee covers no direct, special, consequential or other damages and is strictly limited to up to 100% of the amount paid for FasTrak service. When a specified ship date is missed due to factors outside Terra's control (vendor performance, deliveries by shipping companies, etc.) and random factors such as accidents, the credit of up to 100% of the FasTrak 24/7 may not apply. FasTrak service requested after order placement will be quoted and accepted based on available time remaining before required ship date.