Summary

  • ADA compliant 6’ Purifier Axiom C1 BSC with OmniFlex Type A2 and B2 modes
  • For Biosafety Level (BSL) 1, 2, and 3 containment or BSL 4 with PPE
  • Intuitive MyLogic Operating System shows clear status information on LCD display
  • Chem-Zone work surface provides operator safety when working with hazardous vapors
  • Includes required base stand
  • Exhaust Volume for 8" sash height: 556 CFM @ 0.15" w.g
  • Nominal inflow velocity of 105 feet per minute (fpm) (0.53 m/sec)
  • Nominal downflow velocity: 65 fpm (0.33 m/sec) for 4' models; 55 fpm (0.28 m/sec) for 6' models
  • Maximum sash opening height: 22.6" (58 cm)
  • Viewing height: 27.0" (69 cm)
  • Conformance: NSF/ANSI Standard 49 Listed; ADA-compliant operation UL Standard 61010-1; ISO 5 conditions per ISO 14644-1 and 2; CAN/CSA 22.2 No. 61010-1; CE Conformity Marking (230V models)
  • Type A mode for routine microbiological applications and cell culture work
  • Type B mode for handling hazardous chemicals
  • Filters hazardous aerosols and particulates for personnel, product and environmental protection
  • Included connection discharges HEPA filtered exhaust air directly back to the lab
  • Sash design: 10° angled fully-closing, 1/4" tempered safety glass sash with counterbalanced, anti-racking and easy-to-lift mechanism
  • Material: 304 stainless steel work surface, leak-tight  stainless steel interior, powder-coated steel exterior, safety glass sash, NSF-Approved, powder-coated steel non-welded (base stand)
  • Exclusive Labconco features of Purifier Axiom C1 BSC:
  • Omni-Flex™ two mode design for Type A and Type B modes
  • MyLogic™ Operating System
  • LCD information system: Smart-Start™, Night-Smart™, Filter Life Remaining" bar graph for each HEPA filter, status line alarm and alerts when filter life diminishes to 20% and 0%
  • Chem-Zone™ work surface with a dedicated direct exhaust for use with hazardous vapors or radionuclides
  • Fully scannable 99.99+% supply and exhaust HEPA filters (99.999% ULPA filters option available)
  • Dual Electronically Commutated Motors (ECM)
  • Constant Airflow Profile™ (CAP) Technology airflow monitoring system
  • Active Protection Protocol prevents flow of air into the lab by operating exhaust blowers for up to five minutes, in the event of exhaust system failure
  • Enhanced containment with Air-Wave™ Entry System and Contain-Air™ Negative Pressure Channel
  • Two electrical duplex receptacles and touchpad positioned on right side
  • Reserve-Air™ Secondary Airflow Slots* on curved waterfall design stainless steel inlet grille
  • Removable 3-piece work surface (304 stainless steel)
  • Additional benefits: Low static pressure and volumetric rate exhaust requirements in Type B mode (no need for dedicated exhaust system), safe negative pressure design, glare-free LED lighting (located outside contaminated work area), bright 0-150 footcandle, Interval/elapsed timer for experiment monitoring, electronic security lock with access code(optional activation),
  • Options:
  • NSF-Approved, powder-coated steel non-welded telescoping base stand with feet (unassembled)
  • Accessory Package: UV lamp (254 nm), service fixture(s) with ball-type valve(s) and Vacu-Pass™ Cord & Cable Portal
  • Type B mode: 10" diameter stainless steel manual damper
  • Bag-In/Bag-Out Package: Exhaust Filter for use with radionuclides or harmful chemicals

Specifications

Model: Purifier Axiom

Width: 72"

Biosafety Class: Class II C1

UV Lamp: Optional

Base Stand: Included

Manufactured by: Labconco

Sash Opening: 8"

Manufacturer SKU: 304680101

Unit of Measure: EA

Marks & Listings: UL, NSF 49

Electrical Specifications: 110/115 V, 16 A, 455 W, 50/60 Hz

Weight, Product: 955 lb

Dimensions, Product: 78.3" W x 32.7" D x 64.2" H

Weight, Shipping: 1,175 lb

Dimensions, Shipping: 86" W x 44" D x 79.2" H

Package Type: Skeletal Crating

Features and Benefits

Products Tailored to Your Cleanroom Environment

Provide Terra with your desired ISO Grade™ design. We will tailor the product to meet your criteria and certify it with a report appended to your invoice. Certificate includes all the necessary information to streamline audits and facility compliance.
Popular Accessories
For a full list of accessories, select a product then click Choose Accessories on that product page.
  • Telescoping Base Stand with Fixed Feet

    Tubular, epoxy-coated steel frame base stands are adjustable to eight height positions in 1” increments from 27.5" to 34.5”; used with Labconco BSCs, hoods and enclosures
  • Hydraulic Lift Base Stand

    Electric height adjustment from 25.5" to 33.5” ideal for operators of varying heights and wheelchair-bound users; compatible with Labconco BSCs, hoods and enclosures
  • Remote Blower

    Labconco offers energy-efficient remote blowers with an ECM motor that handle airflow from 250 CFM to 3200 CFM satisfying various exhaust requirements
  • UV Sterilization Lamp

    Germicidal UV lamps keep clean the interior of Labconco biosafety cabinets, hoods and benches by breaking up chemical bonds and denaturing RNA and DNA
  • Vacu-Pass™ Cord & Cable Port Kit

    NSF-approved port for power cords and vacuum tubing for use with Labconco biosafety cabinets and hoods; 4 closed-cell neoprene plugs for 1/8, 1/4, 3/8 or 1/2 inch cords or cables
  • Service Fixture Kit

    Available service fixture with a serrated hose tip valve, ball valve, a control handle and instructions for plumbing to services; compatible with Labconco Axiom BSCs and Purifier Logic Hoods
Other products you may find relevant
  1. Lightweight 6-channel airborne particle counter with a sensitivity range from 0.2- 2.0 μm; ideal for spot-checking critical environments and cleanrooms
    From
    As low as $4,139
    Some ship in %s days
    Lighthouse Handheld Airborne Particle Counters by LWS
  2. Microbial air sampler for cleanrooms and aseptic environments provides continuous and periodic sampling with a 100 L/min. flowrate and a 6 hour battery life  |  1510-53 displayed
    From
    As low as $4,578
    Some ship in %s days
    Lighthouse ActiveCount Viable Air Samplers by LWS
  3. Respirator kit shown with head cover.  |  2821-00 displayed
    Request Quote
    Usually Ships in 20 - 26 days
    Response Kit: PureAir Bio™, White
  4. 24-Gallon stainless steel ISO 4 BioSafe waste receptacle with a hands free foot pedal.  |  1456-18B displayed
    From
    As low as $431
    Some ship in %s days
    BioSafe® Cleanroom Waste Receptacles
  5. ValuLine Stainless Steel Trash Cans from Rubbermaid come in 5 different sizes
    From
    As low as $385
    Some ship in %s days
    ValuLine™ Waste Receptacles
  6. Yellow Slimline safety cabinets by Justrite are fire resistant double wall, air insulated and welded steel construction  |  1619-90 displayed
    From
    As low as $1,200
    Some ship in %s days
    Yellow Slimline Safety Cabinets by Justrite
  7. Sure-Grip EX deep SlimLine safety cabinets provides OSHA-, NFPA-compliant protection and containment of flammable materials  |  1618-21 displayed
    From
    As low as $1,960
    Some ship in %s days
    Sure-Grip® EX Deep Slimline Safety Cabinets by Justrite
  8. Corrosive Storage by Justrite features two manual stainless steel doors with 3-point stainless steel bullet latching system  |  2820-09A displayed
    From
    As low as $1,390
    Some ship in %s days
    Corrosive Storage Cabinets by Justrite
  9. The MET ONE HHPC 6+ is a full-featured, six-channel handheld particle counter  |  1505-50 displayed
    From
    As low as $2,163
    Some ship in %s days
    MET ONE Handheld Air Particle Counters by Beckman Coulter
  10. PureFlow Laminar Transport Cart system provides an uninterrupted vertical laminar flow of HEPA-filtered air in the storage area  |  1529-68 displayed
    From
    As low as $16,270
    Some ship in %s days
    PureFlow™ Laminar Flow Transport Carts
  11. Granite vibration isolators are ideal for precision electronic weighing scales, and microscopes  |  1580-20 displayed
    From
    As low as $863
    Some ship in %s days
    Granite Isolators
  12. ErgoHeight® tables provide a 15" range of vertical motion; all-stainless steel construction for  |  3504-00A displayed
    From
    As low as $1,659
    Some ship in %s days
    ErgoHeight® Electric Height Adjustable Cleanroom Workstations
  13. Soft, durable wipes gently clean and polish scratch-sensitive optics or magnetic disk media surfaces  |  5605-07 displayed
    From
    As low as $68
    Some ship in %s days
    Cleanroom and Laboratory Wipes from Valutek
  14. The AirGard® Air Velocity Monitor displays air velocity to ensure laminar airflow or ventilation  |  6704-65 displayed
    From
    As low as $696
    Some ship in %s days
    Air Velocity Monitors
  15. VacuuBrand by Labconco is a BVC Fluid Aspirator Pump that is shown without the collection bottle  |  3642-50 displayed
    From
    As low as $1,561
    Some ship in %s days
    VACUUBRAND Fluid Aspiration Systems
  16. Anti-fatigue mats enhance worker comfort, resist chemicals and common disinfectants, and prevent accumulation of microbes  |  5606-00 displayed
    From
    As low as $77
    Some ship in %s days
    Anti-Fatigue Mats by Wearwell
  17. Made of stainless steel, the hand-held UPLA-filtered Micro-Vac vacuum is clean and lightweight. A complete attachment kit is included  |  5100-00 displayed
    From
    As low as $1,766
    Some ship in %s days
    Universal MicroVac™ Portable Cleanroom Vacuum Cleaner
  18. Biotfit ISO4 black desk chair includes high profile tubular steel base, dual-wheel casters, footring and four-way contouring seat
    From
    As low as $461
    Some ship in %s days
    Elite and Eton ISO 5 Ergonomic Cleanroom Chairs by BioFit
  19. Equipment Testing
    Request Quote
    Equipment Testing
  20. Vinyl material and ultra-clean construction makes this chair suitable for use in a Class 100 environment  |  1012-05 displayed
    From
    As low as $508
    Some ship in %s days
    Tec Line ISO 5 Cleanroom Chairs by Dauphin
  21. Static-dissipative fabric makes these chairs safe for use around sensitive components and equipment  |  1013-00 displayed
    From
    As low as $590
    Some ship in %s days
    Tec Line ESD Chairs by Dauphin
  22. Class 100 Ergonomic Static-Control Chairs include conductive casters for static-safe rolling on surfaces
    From
    As low as $609
    Some ship in %s days
    Tec Line ISO 5 ESD-Control Chairs by Dauphin
  23. Dauphin Urethane Chairs are built to meet Class 10 cleanroom standards  |  1013-17 displayed
    From
    As low as $282
    Some ship in %s days
    ISO 4 Polyurethane Cleanroom Chairs by Dauphin
  24. Eddy Laboratory Chairs feature durable polypropylene seats and backrests for high-traffic operations involving multiple users throughout the workday  |  1013-56 displayed
    From
    As low as $328
    Some ship in %s days
    Eddy Laboratory Chairs by Dauphin
Copyright 1999 - 2024 Terra Universal. Inc. All rights reserved.