-
Barnstead LabTower Water Purification Systems by Thermo Fisher ScientificStockedGroup of 2 products1108-PP-03 71848FromAs low as $19,523Some ship in 5 - 7 daysStocked
Ships Free
1 Voltage1 Water Production Rate1 Total Organic Carbon1 Model1 System Features2 Manufacturer SKUVoltage: 120/240 VWater Production Rate: 23.8 Gal/hrTotal Organic Carbon: 1-5 ppbModel: LabTower EDISystem Features: SterileManufacturer SKU: 50132395, 50132396
(1) Active Filters
See Product(s)
Category
Advanced ProtocolGravity and mechanical convection benchtop advanced protocol ovens with a maximum temperature of 330°C feature an adjustable fan speed and 10-program memory.- Analytical InstrumentsSuitable for temperature control to external systems; high heating/cooling capacities to ensure rapid heat-up and cool-down times; reduces heat generation in external instruments, such as measuring cells, chromatography columns and rotary evaporators.
Automated DNA ExtractorPatented paramagnetic particle based extraction chemistry, the InnuPure C16 provides laboratories with automated and efficient small to medium throughput extraction of nucleic acids; extracts RNA or DNA from 16 samples in parallel
BatchMixes, homogenizes and emulsifies a fixed volume of liquid; maintains a constant speed despite changes in sample viscosity; may introduce airborne contaminants into samples.
Bead-Based HomogenizerBenchtop bead-based homogenizers by Benchmark Scientific, Analytik Jena and Next Advance are available in a range of capacities and effectively grind and homogenize various tough samples. Select models with memory storage function.
Block HeaterA wide range of blocks heaters are available with dry bath models from Thermo Fisher Scientific, Benchmark Scientific and Torrey Pines. Dry baths with block heaters accommodate a wide range of tubes and PCR strips.
CO2-ResistantCO-2 resistant shakers, for use in 95% humidity and carbon-dioxide rich environments, are incubator and cold room safe. Universal and dedicated platforms are available.
Colony CountingColonyDoc-It Imaging Station by UVP visualizes white light, fluorescent and GFP colonies. Models feature a hi-res 17.9 Megapixel camera and fits 33-150mm plate filter; provides automatic and fast colony counting with detailed statistics.
FTIRFourier Transform Infrared (FTIR), uses an infrared light source to measure absorption and identify chemicals.
HEPA-FilteredProvides a wash of micro-filtered air to dislodge and remove particles
Horizontal GelHorizontal electrophoresis systems separate nucleic acids based on size; samples are run through an agarose gel with large pores to create bands of similarly sized molecules.
Plate CoolerPlate coolers are ideal for use in PCR workstations. Dry baths with a plate cooler keep samples cool and safe from degradation due to temperature fluctuations.
Advanced Protocol SecurityGravity and mechanical advanced protocol security incubators with a working temperature from 50° to 330°C are equipped with a door lock, automatic Overtemperature and undertemperature alarm and provide the ultimate protection of critical samples.
Anemometer, Flush MountConvenient panel-mount instrument for monitoring air flow in a cleanroom, laminar flow hood or other clean enclosure
BoxBox furnaces for use in composite and high-temperature research, powder metallurgy and precious metals treatment are available in single program and multiple segment temperature controllers on select models
DNA GelsDesigned for basic gel documentation PhotoDoc-It Imaging Systems by UVP are compact and economical units that easily transfer images to a computer via a memory card. Select models are available with a Transilluminator.
Face Mask DispenserAcrylic or stainless steel face mask dispensers for individual masks or a single box
FTIR/ATRFourier Transform Infrared/Attenuated Total Reflectance (FTIR/ATR), measures changes in a sample that occur when an internally reflected infrared beam makes contact with the sample.
Hand WasherHands-free faucet and soap dispensers meet aseptic protocol; many sizes accommodate one or multiple users
Handheld HomogenizerHandheld Homogenizers such as the D1000 by Benchmark Scientific are ideal for homogenizing, emulsifying, suspending and disrupting softer tissues, bacterial cultures and biological samples.
InlinePrevents air induction during operation; sterile suspending, emulsifying and disagglomerating of lab samples; can be used for vacuum or pressurized shearing of high-viscosity samples.
Multi-BlockMulti-block dry heaters are compatible with compact, digital and touch screen dry baths. Select models are interchangeable and are available with heat insulators and lids.
Plate ReaderSelect from microplate absorbance readers or multimode microplate readers; low cost, small footprint microplate absorbance readers quickly image ELISA, protein and nucleic assays; multimode readers detect absorbance, fluorescence, luminescence in a single run
UV LampEconomical, fast-acting UV-C lamp kills a broad range of microbes; ideal for use in many enclosure types
Anemometer, HandheldMeasures velocity, volume, temperature and humdity without the need to change probes/ telescoping probe is ideal for hard-to-reach spaces
Automated PipettorHigh resolution, compact, automated robotic dispenser compatible with a variety of microplates, vials and reagent reservoirs; broad dynamic volume range with non-contact, tip touch, and set mix protocols; improves efficiency, saves time, and reduces errors inherent in complex, repetitive pipetting
Cleanroom CompliantCleanroom compliant ovens feature a stainless steel interior and HEPA filtration.
DNA/ Protein GelsBenchtop DNA/Protein Gel Imaging Systems such as the BioDob-It2, MultiDoc-It, DigiDoc-It and GelMax include a high-resolution camera and user-friendly software.
Immersion BathImmersion circulators provide precise temperature control for bath tanks with a capacity of up to 50L. An easy pump (sold separately) changeover design ideal for switching from internal to external applications.
Light FixtureLED and fluorescent models available, in 4' x 2' ceiling-mount panels or LED strips for mounting on ceiling T-bars- Liquid SanitizerLiquid sanitizer eliminates 99.999% of tested pathogens on shoe soles
MuffleBenchtop muffle furnaces feature a coil heating system for rapid heating with minimal temperature fluctuation. Models are ideal for use in catalyst research, annealing glass, determinations of volatiles and ashing organic and inorganic compounds.
Paddle BlenderPaddle blenders eliminate contaminating samples by rapidly striking the sterile bags, producing thorough mixing and homogenization without directly contacting samples.
Plate SealerPerforms uniform, airtight sealing of all standard 96- and 384- well plates; for PCR, sample storage and sample archiving in clinical, genetics, and pathology labs- Powder BufferElectrophoresis powder buffers formula
Shelving SystemsConfigure your own shelving systems: Specify shelf depth, number of shelves per unit, posts, casters, and other options for your shelving units.
EconomyCost-efficient gravity convection economy ovens provide precise high temperature ideal for a wide range of drying applications.
HumidityHumidity test chambers provide uniform temperature and humidity conditions ideal for shelf testing in clinical applications. Water management source are available on select models.
Laboratory SinkFree-standing sink stations with deep basins and drainboards- Motorized BrushThese shoe cleaners operate by activating motorized brushes to clean all shoe surfaces
Open BathOpen bath circulators are designed for internal and external temperature applications
Plate WasherWash, rinse and dispense liquids into 48, 96, and 384 well microplates; achieve fast and repeatable automated microplate processing.
ProgrammableProgrammable dry baths provide excellent operator control over temperature, time and data management. Many digital dry baths will display temperature, timer and other programming functions. Models also feature a program memory.
SonicatorSonicators by Branson and Qsonica, used in ultrasonic cleaning and cell disruption, feature a microprocessor, probe, memory storage and digital display on select models.
Thermo-HygrometerHIgh-precision instruments for monitoring and logging temperature, humidity, dew point
General ProtocolBenchtop and large capacity general protocol incubators with operating temperatures from 50° to 250°C are ideal for routine heating and drying applications. Available in gravity and mechanical convection models
General PurposeGeneral-purpose shakers are available with a variety of dedicated and universal platforms, clamps and adapter plates.
Microplate DispenserCompact 8- and 12-channel accurate, high-throughput bulk reagent dispenser; graphic interface controls row dispensing patterns for 96-, 384-, and 1536-wells plates; optional tip-touch command for precision dispensing down to 2µL- Open Heating BathOpen heating baths used in internal applications of a circular bath feature stainless steel or Polycarbonate bath tanks. Select models have a quiet operation and an LED display.
ShakerShaking dry baths are available with digital heating and cooling, interval shaking and chilling/ heating capabilities. Models are ideal for use with DNA extraction and enzymatic reactions.
Thin Layer ChromatographyBenchtop ChromaDoc-It Imaging System by UVP, designed for thin layer chromatography (TLC), features a high-res 17.9 Megapixel DigiCam 130, a low profile Chromato-Vue UV viewing cabinet and user-defined settings.
UV TowerEight high-instensy angles bulbs ensure 360° irradiation of lab, medical facility or cleanroom, including ceiling; includes safety occupancy sensors, remote activation
Vertical GelVertical electrophoresis systems separate proteins; samples are run through an acrylamide gel to make molecular weight determinations.
Work PlatformAll-welded, stable, cleanroom-compatible structures include a top platform up to 88"D (2235 mm) for multiple users and large equipment
ComputerErgonomic, fully configurable medical computer carts integrate information and technology in existing medical spaces; foot pedal with gas spring assisted control for variable height adjustment
Large CapacityGravity and mechanical convection large capacity ovens are available in powder coated steel or stainless steel finishes; capacity sizes from 14.8 to 27.3 cubic feet
Microplate WasherFill and aspirate 96-well microplates in less than 9 seconds; touchscreen interface with programmable dispensing volume, nozzle insertion/exit rates, and dispensing pressure; small footprint easily integrates into high throughput automated work cell
Recirculating CoolerRecirculating coolers are ideal for use in lab and semiconductor applications. These environmentally friendly and economical models are an excellent choice over cooling with tap water
Safety ShowerEnclosed polypropylene shower with immediate-response full-body and eye wash
Single BlockSingle block heaters, ideal in low throughput labs, are compatible with versatile dry baths from Thermo Fisher Scientific, Vitl, Benchmark Scientific and more.
UV Gel DocumentationEasy-to-use stand alone system designed to save and print gel images easily. VisionWorks software allows for gel analysis.
Electronic TraysStore PCBs and other sensitive electronics in a clean, static-safe environment; molded static dissipative fiberglass trays with reversible dissipative rubber inlay; includes vibration-suppression casters for delicate parts
IncubatedIncubating shakers control temperature during shaking procedures. Select models are stackable and feature a HEPA filter.
UVClaveUltraviolet Chamber uses UV-C bulbs and reflective walls for 360° exposure
VacuumVacuum ovens by Thermo Fisher Scientific and other leading manufacturers are available in analog and digital models ideal in pharma, food, desiccation and process control applications.
Wall-Mount SinkIdeal for cleanroom and laboratories, these hands-free sinks also allow easy parts washing
Incubated/RefrigeratedIncubated/Refrigerated shakers, for use in eukaryotic applications, are available in benchtop and upright models. Select models combine orbital shaking with general-purpose temperature controlled processing.
Stainless Steel TankStainless steel bath tanks used with circulators are corrosion-resistant and are ideal for use in the following temperature control applications: cell measurement, photometers, heating glass flasks and temperature testing.
StandardRemoves surface-deposited particles from personnel with class 100 HEPA filtered air prior. Uniform pattern of nozzles arranged on walls and ceiling ensures effective distribution of filtered air; contaminated air exhausted through wall-mounted vents. Programmable, solid-state microprocessor panel controls access door.
Volatile Compound StoragePrecision High-Performance Ovens, for storing volatile compounds have a broad temperature range and precise temperature control for high temperature drying.
Low-SpeedLow-speed shakers provide gentle, orbital motion for sensitive gels and blots. Models ideal for blot hybridization and washing, staining and de-staining of gels.
MicroplateMicroplate shakers accommodate the unique footprint of microplates and PCR plates ideal for labs conducting high-throughput molecular biology assays or ELISAs.
Open Air OrbitalOpen Air Orbital Shaker for placement in incubators, test chambers and refrigerators
TotesStore and transport ESD resistant tote boxes for electronics cleanroom applications; chrome-plated stainless steel cart is cleanroom compatible; telescoping frames provides a safe and secure capture of totes
UtilityEconomical, ergonomic utility carts for everyday laboratory use; select from chrome plated steel for cleanroom use; polyethylene or polymer construction for corrosion resistance or microban for antimicrobial product protection
PlasticPolypropylene resists acids, solvents and alcohols. SDPVC combines excellent chemical resistance with enhanced static control. Acrylic offers an economical solution, but is damaged by alcohol and other cleaning agents.
- 187-900 nmCompact UV-Visible Spectrophotometers with a Photomultiplier tube detector
- 190-1100 nmCompact, light weight and portable unit for measuring samples in the visible light spectrum; easily measure absorbance, % transmission, concentration and kinetics
- 190-900 nmCompact Spectrophotometers with a Photomultiplier tube detector
- PortableEquipped with handles for part transfer between labs
Air Center CompressorsCompressed air is required to operate one of Terra's nitrogen generators.
DesiccantColor-indicating silica gel adsorbs moisture and regenerates under low heat; many cartridge sizes.
Re-Gen Gas PurifierProduces an ultrapure inert atmosphere for materials sensitive to moisture and/or oxygen by circulating an inert gas and removing oxygen and moisture inside the glovebox.
Tote BoxesPlastic totes fit inside Terra Kitting Box Desiccators; anti-static models available.
Mat FrameAnodized aluminum construction ensures a durable, uniform base of adhesive mats; allows easy removal of soiled adhesive sheets
Shoe CleanerAutomated systems clean shoes or booties when you insert foot or cross a cleaning surface
Shoe Cover DispenserAutomatic dispenser applies shoe cover when you insert foot
Sticky MatTear-off adhesive sheets remove contaminants from shoe soles; many sizes, colors
- AbsorbanceAgileReader, SmartReader and EnSight Plate readers perform in absorbance mode for ELISA, protein and nucleic acid assays. Select models feature multi-measurement modes and include software.
Chemical ResistantChemical-resistant hot plates by Benchmark Scientific and Thermo Fisher Scientific are made with ceramic-coated stainless steel or polypropylene top. Select models feature a digital display.
CleanroomISO-5 and cleaner carts suitable for cleanroom use- Cleanroom UseMulti-stage HEPA and ULPA filtered vacuum cleaners remove dust and particle contaminants before returning air; select models contain autoclavable parts for aseptic, biological applications or ESD resistant materials for static sensitive applications
- Climate ChamberAn environmental simulation chamber is suitable for complex temperature profiles in the range of -40 °C or -70 °C to 180 °C. Dynamic climate chambers not only make material testing in this temperature range possible, but can also regulate humidity in the range of 10 % to 98 % RH.
- ELISAELISA measurements are performed with multi-mode plate readers such as the 8-filter capacity AgileReader by ACTGene; model is compatible with the AgileWasher featuring 99 user-defined wash protocols.
- High Viscosity LiquidsDigital and control overhead stirrers for high viscosity liquids are available with a wide range of stirring elements.
- ELISA, Protein Assays, Nucleic Acid AssaysEconomical SmartReader 96 Microplate Absorbance Reader with a 96-well capacity is ideal for ELISA, protein and nucleic acid assays.
- Environmental TestingEnvironmental test chambers perform stability and product testing of materials. Select models feature a horizontal laminar airflow that deliver a precise, elevated temperature environment
- Explosion ProofCertified explosion proof and intrinsically safe; models meet requirements for use in Class I, Group D, and Class II, Groups E, F, and G.
General PurposeGeneral purpose hot plates, in ceramic and aluminum tops are available in single and multi-position models with digital features on select units.- MicrobiologySterile culture tubes and inoculating loops and needles, ideal for use in microbiology applications, eliminate cross-contamination.
- FluorescenceFluorescence (TRF) mode is ideal in labs studying signaling pathways, epigenetics, receptor-ligand binding and most biochemical processes.
Incubator SafeIncubator compatible models such as the MiniMag Magnetic Stirrer by Benchmark Scientific are able to withstand operating temperature ranging from +4°C to +45°C or from -10° to +56°.
MedicalIn addition to non-corroding, anti-microbial polymers, these carts include specialized add-on features for medical equipment and documentation- Plant GrowthPlant growth chambers, designed for use in seed germination and plant growth applications, provide homogeneous light distribution with natural illumination
- Hazardous MaterialThree-stage filtration system consists of a disposable collector bag, pre-filter, and HEPA filter (99.99% efficient at 0.3 microns); optional cloth filter bag is available as a fourth stage of filtration
MicroMicro hotplates such as the Aluminum Top Micro Hot Plate by Thermo Fisher Scientific have a heating surface of 3.5" and feature a machined cast-aluminum top for excellent heat transfer.- LuminescenceLuminescence mode produces a robust signal from fewer samples and reagents with the use of a photomultiplier to boosts signal strength.
Remote ControlThermo Fisher Scientific remote control hot plates are ideal for use in wet processing station, fume hoods and in corrosive environments by enabling users to operate the equipment up to five feet away.- Wet/DryDesigned specifically for cleanroom applications, this vacuum is equipped with a unique four-stage filtration system which is designed for liquid or dry pick-up with no filter change or adjustment.
- Sealing PlatesPlate sealers use uniform heat distribution to eliminate need to rotate or reseal. Ideal for sample storage, archiving, or PCR reactions.
304 Stainless SteelDurable; resistant to corrosion, chemicals/solvents, and rust. Making it the preferred material wherever frequent cleaning and sterilization are required.
Epoxy-Coated SteelEconomical epoxy-coated incubators are well suited for standard incubation and the durable, chip-resistant finish will withstand years of use.- Polycarb/PolyproUnique construction of Polycarbonate and Polypropylene, providing high impact resistance, thermal resistance, and resistance to most acids
- Bronze AcrylicBronze Acrylic; withstands exposure to fluorescent light without darkening or deteriorating; shatter resistant
CeramicCeramic hot plates by Thermo Fisher Scientific feature an acid and alkali resistant smooth flat surface designed for maximum heat transfer.- ChromateEconomical, chromate finish for dry, low humidity environments. Provides the look of chrome and includes a protective lacquer coat.
- Coated SteelCost-efficient coated steel incubator chamber is durable, scratch and chip resistant and easy-to-clean.
- Double-Walled SteelDouble Wall Stianless Steel construction; Durable; resistant to corrosion, chemicals/solvents, and rust. Making it the preferred material wherever frequent cleaning and sterilization are required.
- NitrileNitrile gloves are ideal for your most critical cleanroom environments. Their nitrile formulation is completely free of latex proteins that cause allergic reactions in many wearers. They are also virtually free of most trace elements, with less than 0.1 µg / cm2 detectable F, Cl, Br, PO4, SO4, Na and K, and contain no plasticizers, silicone or powders.
Powder-Coated SteelDurable powder-coating protects steel housing and minimizes contamination; these models incorporate filters with aluminum frames.- PTFEFreeZone Freeze Dry Systems by Labconco with a corrosion resistant PTFE-coated collector coil have a brushed stainless steel and glacier white, powder-coated steel exterior.
- CopolyesterCopolyester construction blocks 99% of UV light, and provides resitance to staining and broad chemical resistance
- NylonNylon reduces skin irritation caused by contact with glove materials. Lightweight, non-linting, 100% virgin nylon. Provide dexterity, while offering comfort and improved grip in palm.
- Painted SteelChemical-resistant painted steel incubator chamber protects and extends the life of the incubator chamber.
- PolyethyleneThe most widely used of all polymers, polyethylene offers high ductility and impact strength
- AcrylicEconomical acrylic provides excellent clarity and provides high tensile strength; it is damaged by frequent contact with alcohol and other common cleaning agents.
- Copolyester AmberCopolyester Amber construction reduces visible light penetration by over 50%, perfect for storing light sensitive materials
PolyurethaneNon-outgassing static-dissipative polyurethane contains no plasticizer, making it ideal for chemically sensitive environments- Wood LaminateDurable, easy to clean, hypoallergenic
- Chlorinated PolyethyleneVery durable material; resistance to heat, oxidation, and ozone; excellent weatherability.
- HD PolyethyleneHigh-density polyethelyene offers high tensile strength and temperature resistance
- Metroseal 3Corrosion resistant — patented Metroseal 3 epoxy is warranteed against rust and corrosion for 12 years (see warranty info).
- PVCPVC cleanroom glove is also available which has excellent ESD properties and is a good fit for use in microelectronics manufacturing.
- Copolyester ClearCopolyester Clear construction blocks 99% of UV light, and provides resitance to staining and broad chemical resistance
- LD PolyethyleneLow-density polyethelyene is flexible and tough
- QualathermDesigned for dry handling of materials with contact temperatures as high as 1200°F (644°C). The tough outer shell does not burn, char, melt, or outgas at temperatures that could cause contamination or shedding. It breaks down into CO2 and H2O.
- FiberglassFiber glass is strong, long-lasting, non-conductive, radio frequency transparent, and it also absorbs sound waves.
- PolymerPolymer has a good resistance to chemicals; can be both a thermal and electrical insulator; Very light in weight while being strong and durable
- PolystyrenePolystyrene; offers visual clarity, handles temperatures from 0˚ to +70˚C and centrifugal forces up to 2000 xg; doesn't react with other materials.
- Sterile NitrileFor use in Class 10 environments ideal for your most critical cleanroom environments. Their nitrile formulation is completely free of latex proteins that cause allergic reactions in many wearers. They are also virtually free of most trace elements, with less than 0.1 µg / cm2 detectable F, Cl, Br, PO4, SO4, Na and K, and contain no plasticizers, silicone or powders.
- Epoxy ResinEpoxy Resin; tested resistance to: damage from common organic compounds and volatile/non-volatile chemicals, bacteria and fungus; Heat deflection up to 325°F (167.2°C); Self-extinguishing surface; Non-absorbent and corrosion resistant; Non-reactive and low-sheen uniform finish
- ResinHigh-quality material optimal for both indoor and outdoor use
- GlassThe non-porous surface of glass is easy to clean and resists most detergents, but electrostatic charges may accumulate on its surface
- Stainless Steel/PlasticStainless Steel is corrosion resistant, durable, and easy to clean. (see product details for specific Stainless Steel Grade) Plastic; the material provides a sustainable, durable, long lasting design and construction. (see product details to see specific type of plastic and additional material details)
- Powder Coated SteelMore economical than stainless steel; offers excellent corrosion and chemical resistance
SteelExtremely durable, aseptic, easy to clean, low bio-burden; inherently non-combustible; smooth internal surfaces without cracks or crevices that harbor germ colonies
- Class II A2Designated for use with BSL Class I and II organisms, such as E.coli. 70% of air is recirculated within the hood, 30% of the air is exhausted through a HEPA filter.
- Class II B2Protects users, products and environments from hazardous agents that require Biosafety Level 1, 2 or 3 containment. Dedicated exhaust system and remote blower discharge 100% of filtered exhaust air. Suitable for use with hazardous chemicals and fumes.
- Class II C1Toggle between A2 and B2 configurations. Protects personnel, product and lab environment by maintaining complete containment in event of exhaust system failure. For Biosafety Level (BSL) 1, 2, and 3 containment or BSL 4 with PPE
ISO 5The product design and materials are recommended for use inside an ISO 5 environment based on Terra's ISO Grade™ criteria.
ISO 6The product design and materials are recommended for use inside an ISO 6 environment based on Terra's ISO Grade™ criteria.
ISO 7The product design and materials are recommended for use inside an ISO 7 environment based on Terra's ISO Grade™ criteria.
ISO 8The product design and materials are recommended for use inside an ISO 8 environment based on Terra's ISO Grade™ criteria.
- ASTM Type 1Reserved for the most sensitive processes, such as High Performance Liquid Chromatography (HPLC); very low levels of biological and ionic contaminants.
- ASTM Type 1/2Units capable of producing either Type 1 or 2 water; optional UV oxidation unit and ultrafilter.
- ASTM Type 2For reagent and buffer mixtures and preparation of media for bacterial and cell culture; low ionic contaminants that interfere buffering capacity of solutions; less stringent thresholds for organic contamination
- ASTM Type 3For glassware rinsing, heating baths, filling autoclaves or pre-feeding type 1 lab systems
- DeionizationRemoves ionic contamination that leaves mineral deposits on glassware; for cleaning laboratory glassware and instruments.
- Reverse OsmosisEffectively removes organic and bacterial contaminants, but not ionic impurities or dissolved gases; use as a feed source for producing ultrapure laboratory water
BasicCompact and economical basic dispersers feature an infinitely variable manual speed control; ideal for use in a wide range of analytical research applications.- Multi ProgramMulti-program furnaces are ideal for diverse processes.
- Multi Program/RS232Multi-Program furnaces with RS232 are useful in a variety or processes requiring data management, remote monitoring and control.
- Multi-Program/Multi-SegmentMulti-program and multi-segment furnaces are ideal for diverse processes and traceability documentation for FDA and ISO compliance.
- Multi-Program/Multi-Segment/FlowmeterMulti-program and multi-segment furnaces with a flowmeter provide uniform heat distribution and feature an atmosphere port for measuring fresh air or inert gas.
- SetpointMuffle and box furnaces available in single digital setpoint prevent overshoot.
- Single ProgramSingle program control furnaces are ideal for repeated processes.
- Single Program/Multi-SegmentSingle program and multi-segment furnaces are versatile models ideal for use in labs performing repeated and diverse processes.
BeakersFreestanding, undercounter and ADA compliant labware washers are designed for use with beakers and other wide-mouth general purpose lab glasswares. Labconco SteamScrubber and FlaskScrubbers are versatile units with an array of accessories to accommodate various glassware heights.
FlasksNarrow-neck glasswares such as flasks require a lab washer with spindles. FlaskScrubber Washers by Labconco feature spindles and a patented vacuum drying system that ensures flasks are completely dry.
Atomic AbsorptionDetermines elemental composition of samples via electrothermal vaporization; solid-state detection system reduces background noise and enhances signal-to-noise ratio; detects extremely low concentration elements- Circular DichroismAbsorption spectroscopy method based on differential absorption of left and right circularly polarized light
FluorescentMeasures fluorescence, phosphorescence, bioluminescence and chemiluminescence; operates in single or multiple wavelength kinetics; fits micro cuvettes for low volume biological samples
FTIROperational simplicity, unparalleled sampling, and low maintenance design provides high performance infrared analysis of sample composition; for QA and QC analysis in pharma labs, nutraceuticals, waste water monitoring and academia
- Real-Time PCRReal-time PCR Thermal cyclers in standard, gradient and touch models provide superb excitation and detection of fluorescent dyes.
- Standard PCREconomical and high-performance standard PCR Thermal Cyclers feature a quiet operation, an intuitive interface and quick access to stored programs on select models.
- 304 Stainless SteelDurable; resistant to corrosion, chemicals/solvents, and rust. Making it the preferred material wherever frequent cleaning and sterilization are required.
- Electropolished Stainless SteelStainless steel electrochemically treated to reduce surface imperfections and give uniform polish.
- GraniteGranite's hard, nonporous surface resistts scratching and most harsh cleaning and disinfecting agents.
- Stainless Steel LaminateThe least expensive top. Offers strong magnetic attachment; somewhat resistant to corrosives and liquids.
- Stainless Steel/Plastic LaminateStainless steel with a plastic laminate on the top surface, offering the same cleanliness and strength with less ferromagnetic attachment strength and higher corrosive-resistance.
- SteplessStepless dispersers offer homogenization and emulsification flexibility by meeting allowing a fluid speed control; users can refine the speed range in lower increments.
- HEPARated 99.99% efficient @ particles ≥0.3 µm in diameter; uses FDA-grade silicone sealant.
- BisulfiteinnuPREP Nucleic Acid Isolation Kits are available with bisulfite samples available in 16 and 96 reactions.
- DNAIsolates highly-pure genomic DNA from tissues, plants, soil, bacteria, fungi and stool samples; each tube binds over 100 µg of gDNA with a purity rating of 1.7-2.0; homogenization and lysis is carried out in a single tube.
- DNA MidiinnuPREP Nucleic Acid Isolation Kits with an extraction time of 20-45 minutes are available in 16, 96 and 480 reactions.
- DNA MiniinnuPREP Nucleic Acid Isolation Kits with an extraction time of 75 minutes are available in 16, 96 and 480 reactions.
- Lysis TubesOptimized for use with the SpeedMill Plus, but compatible with other homogenizers; beads of various size and composition for mechanical homogenization of virtually any biological material.
- Plasmid DNASingle column Plasmid Purification Kits offer high quality DNA yields 20% higher than competitors; processes 6mL of bacterial culture in one tube; purified plasmid DNA for PCR, DNA sequencing and cloning.
- RNAIsolates RNA from tissue, plants, bacteria and fungi; DNA pre-filter removes cellular DNA, eliminating the need for β-mercaptoethanol; consistently yields RNA with 9.8 RIN values.
- Vertical GlasswareVertical glassware made of borosilicate are included with select rotary evaporator models; optional shatterproof models are available
UVCompact, lightweight and energy saving transilluminators are available in single and variable intensity models. Ideally suited for imaging gels stained with ethidium bromide.
Visible LightSafer alternative to UV light; blue light will not damage nucleic acid samples; emission wavelength of 465 nm is optimal for new protein stains and green fluorophores.
Cabinet LevelManual flowmeter or automated system controls nitrogen flow rates to maintain RH set point across entire cabinet.
DesiccantDesiccator used primarily as a dust-free enclosure; add desiccant canister to adsorb moisture.- VacuumIdeal for degassing small parts or mixed liquids, vacuum encapsulation, and general purpose vacuum experiments.
Benchtop UVLightweight, compact and energy-saving, the Benchtop UV Transilluminators from UVP can toggle between 365 nm, 302 nm, and 254 nm wavelengths.- Eagle Group, Snap-n-Slide Wall MountThe Snap-N-Slide wall shelf makes efficient use of overlooked wall space. Brackets can be mounted to studs—no wall backing required. Heavy gauge stainless steel construction with rolled front edge.
IBIIBI's gel electrophoresis systems come with buffer and reagents for genomic separations. Select vertical or horizontal gel systems.- J-1000 SeriesJ 1000 Series Circular Dichroism Spectrometers for routine and advanced measurements in the near- and far-UV regions for high quality spectra samples
- Spotlight 150iManual microscopy equipment for analytical IR applications ideal for challenging applications in a variety of industries; can be coupled with Spectrum Two FT-IR
- First LightFirstLight UV Illuminators by UVP deliver uniform excitation for quantitative fluorescent imaging in genomic and proteomic applications; compatible with UVP bio-imaging systems.
InterMetro, Super ErectaSuper Erecta's Modular design allows easy shelf adjustment to suit overhead clearance requirements. Plastic split sleeves (included with shelves) lock shelves at 1 increments.
LS 45Benchtop unit with fixed slits ideal for routine analysis features a Xenon lamp, wide UV output; includes FL WinLab software, single cell holder and semi-micro cuvettes
myGelmyGel electrophoresis system includes gel box, safetly lid, power supply, six casting trays and two double-sided combs.- Spotlight 200Automated microscopy equipment provides a simplified set up and data collection for analytical IR applications. Unit can be coupled with Spectrum Two FTIR.
InterMetro, Super Erecta Wall MountAn ideal method for storing items overhead or above work surfaces. Brackets accommodate all Super Erecta sizes and types of shelves. Use double supports to mount adjacent shelves, single supports at ends.
myVoltmyVolt electrophoresis power supply toggles bewteen constant voltage or constant current modes. Auto-rotating LCD screen adapts to vertical or horizontal positioning.- PinAAcle 500Compact and corrosion resistant Flame AA unit has real-time double-beam optics, a solid-stated detector, software and a mountable touchscreen at an affordable price.
- Spotlight 400Spotlight 400 FTIR is a full-featured spectrometer and macro sampling unit that operates in mid-IR, near-IR or dual range; pixel resolutions of 1.56 µm, 6.25µm, 25µm and 50µm.
MetroMax iCorrosion Proof — lifetime warranty against rust and corrosion.
Microban® Antimicrobial product protection is built into shelves and all touch points inhibiting the growth of mold, mildew and bacteria.
Lift-off shelf mats make cleaning a snap.- Owl EasyCastThermo Scientific simple to use Owl EasyCast B2 Mini Gel Electrophoresis Systems provide superior flexibility in a small footprint.
- SmartBlueSmartBlue Transilluminator by UVP with a two-position amber viewing cover emits blue light in the detection of nucleic acids; compatible with SmartDoc and SmartGlow Systems.
- Spectrum TwoPortable Spectrum Two FTIR features an intuitive interface and optional portability packs allow remote operation. Sampling accessories, carrying case, battery pack, wireless router, car adapter and USB are available.
- QuickSilverAccuris Insturments QuickSilver powder electrophoresis buffers
SmartDocSmartDoc 2.0 Gel Imaging Systems by Accuris capture digital quality images with a smartphone and provides safe viewing of nucleic acids in agarose gels; uses blue light and includes orange photo filter.
SmartGlowSmartGlow Nucleic Acid Pre-stain and loading dyes are economical and safer alternatives to ethidium bromide. SmartGlow provides better visualization of 0.1ng of DNA per band detection limit. Compatible with SmartBlue Transilluminator.
Batch: 5 MohDisposable 40 ml grinding chamber eliminates cross-contamination and model features an infinitely variable speed from 5,000 to 25,000 rpm. Available polypropylene grinding chambers with a stainless steel beater satisfy a range of applications.- Feature Pack 3Compact imaging apparatus mimics dark room conditions; yield high quality images when coupled with high resolution 17.9 megapixel camera; live preview of image for parameter optimization.
- General Purpose: 6 - 9 MohModels feature a removable double-walled, stainless steel grinding chamber that withstands -200°C ideal when used liquid nitrogen; pulverizes hard, brittle, elastic, fibrous and soft materials.
- Feature Pack 4Economical and lightweight hood for basic gel imaging; compatible with a range of UV transilluminators; UV-blocking filter for safe and easy gel placement; 16-megapixel camera can store images to SD memory cards or directly to a PC via USB connection.
GMP CompliantUniversal bath mill with a fixed speed function is ideal for impact and cutting grinding in FDA and GMP compliant labs. Durable model is built with a double-walled stainless steel grinding chamber.
Microfine GrinderIdeal for particle filtering, mill with a 500W motor drive features a modular design with interchangeable grinding heads and sieves.- Feature Pack 6Yields high quality images of pre-stained gels, chromatographs, and bacterial plates; 17.9 megapixel resolution provides publication quality images.
Hybridization StationQuickly and efficiently hybridizes and incubates DNA, protein, carbohydrate and peptide microarrays with little operator intervention; choose from models that process 1, 2, 4, and 16 slides simultaneously
PrinterCustomizable microarrays with nanometer positional accuracy; prints up to 210 standard nucleic acid, protein, or whole cell lysate microarrays
ScannerSelect low-cost colorimetric scanners for analyzing HRP or AP-based enzymatic assays or single- and multi-channel fluorescent detection scanners to analyze multiplexed fluorescent label microarrays
ColorimetricLow-cost, high-throughput colorimetric scanners image enzymatically labeled microarrays; simultaneously reads 12 microarrays in a single run; performs chromatic detection of other protein assays such as Western blots
FluorescentFluorescence based microarray scanners utilize confocal imaging to rapidly obtain high resolution images; compatible with many fluorescent and infrared dyes; multi-channel detection quickly analyzes multiplexed microarray experiments
- Aqueous OnlyFreeze dry systems for aqueous samples have a working temperature of -50°C. Benchtop and console Lyophilizers are available in a range of capacities.
- Low Eutectic PointFreeze dry systems for low eutectic point samples have a working temperature of -86°C. Benchtop and console Lyophilizers are available in a range of capacities.
- Dry IceTube Mill Control with a dry ice cooling process to embrittle materials is well-suited in various applications and industries such as food, pharma, chemical, biology, cosmetics, medicine, forensics, building materials and more.
- Air CoolingHomogenizers with air cooling are designed to minimize the heat during operation and keep the internal temperature of the instrument near ambient temperature.
- Dry Ice/Liquid NitrogenBasic Analytic Mill features a high-grade steel chamber that withstands temperature down to -200°C ideal for use in dry ice or liquid nitrogen cooling procedures.
- Cup HornIdeal for sterile sample processing, sonicators with a cup horn apply high intensity sound on multiple samples without direct horn contact. This indirect sonication enables processing of samples in sealed tubes to eliminate cross contamination.
- FlowcellHigh-volume flow cell boosts flow rates to 20 L/min; ideal for batch volume processing of 5L or larger samples.
- Glass-Cooling CellSonicators with glass cooling cells prevent overheating by maximizing the exposure to ultrasonic energy enabling solutions to automatically circulate through the cooling loops of the vessel; optional temperature probe available for enhanced control.
CentrifugalUtilizes microprocessor controlled heat, vacuum and centrifugal force to rapidly concentrate samples; processes up to 110 samples per run; for molecular biology and proteomics labs.
Heat/N2Directs heat and nitrogen gas downward onto the surface of the sample; reduces partial pressure directly over the liquid to speed evaporation and helps remove solvents.
RotaryProvides four times the distillation efficiency of other methods; automated sample rotation increases sample surface area, speeding distillation; safely and efficiently removes solvents and other impurities
- BioSafe®These BioSafe® models are available in chemical resistant materials for cleaning with alcohol and other biocides and feature open-slot or hinged compartments for easy cleaning and minimal particle build-ups
- General Cleanroom/LabAvailable in chemical-resistant materials, with designs suitable for general cleaning requirements
AnalyticalAnalytical Balances are ideal for use in sensitive procedures, such as weighing laboratory reagents; built-in draft shield and readability below microgram levels.
MicroMicro Balances with readability from 0.001 to 0.005 include a glass draft shield. Modular units are available with optional apps and accessories.
PrecisionPrecision balances have microgram readability and higher weighing capacities compared to analytical balances. Models are excellent for weighing bulk powders for procedures such as media preparation.
Semi-MicroSemi-Micro Balances with a readability of 0.01 include an ionizing draft shield that easily adapts to different applications with optional apps and accessories. Model includes an integrated ionizer to eliminate electrostatic charges.
Ultra-MicroModular Ultra-Micro Micro Balance with a readability of 0.0001 and a weighing capacity of 2.1 g includes a glass draft shield.
Dimpled MatWaving, variable speed and nutating rockers with a dimpled mat include securing bands.
Flat MatFlat mat mixers and rockers feature an autoclavable non-slip rubber mat
Grooved MatTilting rollers and fixed speed platform rockers feature a grooved platform for a variety of tube sizes.
HolderRoto-Therm Incubated Tube Rotator provides an adjustable motion for horizontal or vertical mixing
RotisserieVersatile rotating mixers with a 360°C rotation feature allow users to combine different speeds and motions.
TrayCost-effective trays for rockers require a small amount of reagents for efficiently washing and incubating a variety of gels and blots.
- Bulk PackBulk packaged and placed in double transparent poly liners
Suitable for ISO Class 6-8 - CleanIndividually packaged in an opaque bag and placed in double transparent poly liners
Packaging Conditions: ISO Class 4 Cleanroom
Suitable for ISO Class 5 - Clean & SterileGamma sterilized 10-6 Sterility Assurance Level
Individually packaged in an opaque bag and placed in double transparent poly liners
Packaging Conditions: ISO Class 4 Cleanroom
Suitable for ISO Class 5, Aseptic Cleanrooms
- Non-SterileNon sterile polypropylene tubes compatible with Benchmark Scientific and other lab centrifuges feature a cap and select models are autoclavable and freezer safe up to -45°C
- SterileSterile propylene tubes, inoculating loops and PCR tubes are packaged in sterile foam racks (tubes) or pre-sterilized to help prevent cross-contamination when working with sensitive samples
- Air DisplacementHighly accurate air displacement pipettes create a partial vacuum between the liquid and the piston by dispensing the same volume of air as indicated on the setting. This method improves accuracy and prevents cross-contamination.
- Positive DisplacementPositive displacement pipetting puts the piston in direct contact with the liquid ideal for viscous, volatile or dense liquids.
- Electronic Pipette ControllerElectronic pipette controllers are available in cordless and rechargeable models with 10 hours of continuous operation on a single two-hour charge; accepts 1 to 100ml pipettes. Multipacks available on select models.
- High-Throughput PipettingPipettes with electronic tip ejection and a soft-touch operating button are ideal for highly repetitive pipetting. These ergonomic models minimize muscle strain. Multipacks available on select models.
- Lightweight ElectronicLightweight and ergonomic pipette models are available in 1-, 8-, and 12- channel models designed with an enhanced DC-motor, quick access to frequently used settings and an electronic brake.
- Low-Pipetting ForceAutoclavable pipettes with a low-pipetting force are designed for extended repetitive pipetting. Multipacks available on select models.
- Manual Pipette ControllerManual pipette controller, for glass and plastic pipettes from 0.1 to 100ml, delivers precise control of filling speed and the autoclavable lower body prevents cross-contamination. Multipacks available on select models.
- Self CalibrationSelf-calibrating pipettes are ideal for high throughput labs working with a variety of liquid samples.
- Versatile MechanicalErgonomic adjustable and fixed-volume air displacement mechanical pipettes, available in a variety of volume capacities, are ideal for high throughput labs. Starter kits available.
- Bulk BoxOptifit Tips are available in a box of 1,000 free tips neatly sealed in a bulk bag.
- Bulk CartonOptifit Tips are available in a carton of 1,000 free tips sealed in a bulk bag.
- Refill PackOptifit Tips are available in 10 x 96 and 15 x 96 refill packs.
- Refill TowerOptifit Tips are available in 10 x 96 refill towers.
- Single TraySafetySpace filter tips and Optifit tips are available in 10 x 96 single tray quantities.
- CeramicCeramic bead material in innuSPEED Lysis Tubes optimized for SpeedMill PLUS are for use with animal, plant, insects and dried tissues as well as stool samples.
- Ceramic/SteelCeramic/steel bead material in innuSPEED Lysis Tubes optimized for SpeedMill PLUS are for use with various dried, fibrous and hard (bones) materials.
- GlassGlass bead material in innuSPEED Lysis Tubes optimized for SpeedMill PLUS are for use with bacteria and fungi samples.
- Glass/SteelGlass/steel bead material in innuSPEED Lysis Tubes optimized for SpeedMill PLUS are for use with various bacteria and fungi material as well as fibrous and bone materials.
- SteelSteel bead material in innuSPEED Lysis Tubes optimized for SpeedMill PLUS are for use with fibrous materials and rice grains.
- RefrigeratedRefrigerated centrifuges for use with temperature sensitive samples are available with a wide variety of rotors.
- StandardStandard centrifuges in mini or benchtop designs are economical models ideal for personal use or in low-throughput labs.
- VentilatedVentilated centrifuges available in mini and benchtop models are suited for a variety of non-temperature sensitive samples. Mini and benchtop models are available with fixed-angle or swing out rotors.
- GCX Corp.GCX Corp. design adjustable mounting solutions for computer hardware ideal for medical environment.
InterMetroInterMetro, offer easy to clean, durable, adjustable carts iseal for cleanroom, laboratory, and medical environments.
- Arctic ExpressArctic Express Cryogenic Dry Shippers by Thermo Fisher Scientific use absorbent material to prevent LN2 spills during shipment; models have an 8-, 14- or 23-day static holding times.
BenchBlotterBenchBlotter with a fixed tilt, one touch operation and a 12” x 12” platform is optimized for blot washing, gel staining, de-staining, and hybridization applications.
C1Compact design with automated oxygen filling, venting and flushing; smallest footprint on the market; Complies with DIN 51900 and ISO 1928 in determination of caloric values of solid and liquid fuels; analyzes according to classical isoperibol method.
CentriVapCompact Labconco CentriVap micro IR Vacuum Concentrators have a 24-tube capacity and are available with High Capacity Micro Rotors or Teflon-Coated Aluminum Rotors
Eurostar 100EUROSTAR 100 Overhead Stirrers in digital and control models feature a reversible stirring function, 100L capacity, 30 to 1300 rpm range, 70000 mPas and overload protection.- OptifitOptifit Tips, color coded to match Sartorius pipettes, manufactured in ISO 8 Cleanroom environments comply with ISO 9001 and ISO 13485 from R&D to production and delivery
Purifier AxiomErgonomic Purifier Axiom units convert between Type A and Type B Mode for use in BSL 1,2 and 3 labs; available in 4 ft. and 6 ft. models with sash openings of 8” and 10”
Purifier Logic+Purifier Logic+ discharges 100% of filtered exhaust air from work area via a dedicated exhaust system and remote blower; models need to be hard ducted to the outside
Sartorius MA160MA160 Moisture Analyzer features infrared AURI heaters for high-speed measurement, precise parameter development, a 100-memory storage capacity and removable parts for easy cleaning.
BenchMixerBenchMixer vortex mixer by Benchmark Scientific quickly ramps up to a maximum speed of 3,200 rpm. Compatible with 0.5 ml tubes and 50 ml tubes.
BenchRockerBenchRocker 3D with a 12” x 12” platform features an adjustable speed from 2 to 30 rpm (variable) and a tilt angle suitable for wide range of molecular and biological applications.
Bio-CaneBio-Cane Cryogenic Storage Systems by Thermo Fisher Scientific are durable aluminum Dewars that use a system of color-coded canes loaded with cryogenic vials. Units store up to 2000 vials in liquid nitrogen.
C200Space-saving, low cost, semi-automated combustion calorimeter for determining gross calorific values of liquid and solid samples; operates in four measurement modes: isoperibolic, dynamic, manual, and time controlled.- Eurostar 20EUROSTAR 20 high speed digital and control overhead stirrer, for simple laboratory stirring operations, has a 15L volume capacity, a 30 to 2,000 rpm range, infinitely adjustable speed control and a large assortment of stirring accessories.
RapidVapRapidVap N2 and N2/48 Dry Evaporation Systems by Labconco combine vortex action, heat, and nitrogen blow-down to speed evaporation- SafetySpaceSafetySpace Filter Tips, compatible with Sartorius pipettes, with autoclavable trays and racks are ideal for molecular biology, microbiology, cell culture applications and radioactive work.
Sartorius MA37MA37 Moisture Analyzer features infrared tube heaters, intuitive navigation, removable dishwasher-safe parts, stores 1 method and saves results until next measurement.
BenchMixer XLBenchMixer XL with a 7” x 12” platform and a maximum speed of 2500 rpm provides up to 100 hours of hands free mixing.
BenchWaverBenchWaver 3D with a 13.5” x 13” platform and a non-slip mat provides three-dimensional undulating motion by combining the motility of a rocker and an orbital shaker.
C6000Functions in fast dynamic, classical adiabatic and isoperibol modes; combines modern technology, variability and automation in one instrument; spherically shaped vessel head drastically reduces measurement time.
CXCX Cryo Exchange Vapor Shippers prevent liquid spillage and maintain -190° temperature; temperature loggers available.
Eurostar 200Ideal for use in high volume labs, digital and control EUROSTAR 200 Series Overhead Stirrers have a 100L capacity for highly viscous materials of up to 150,000 mPas.
BioMixerBioMixer rockers with a 10.5” x 7.5” platform feature a fixed-speed 3D (nutating) motion with a tilt angle of 20°. Units are ideal for moderately aggressive mixing.
CXRCXR Cryo Exchange Vapor Shippers include a replacement adsorbent kit and are constructed with a ribbed high strength aluminum body; select models include an 11” canister with CXR 100 and replaceable adsorbent with CXR500.
Eurostar 40EUROSTAR 40 digital Overhead Stirrer for universal lab stirring operations, stirs 25L of liquid with a viscosity up to 40,000 mPas, a 30-2000 rpm speed range and overload protection.
Incu-MixerIncu-Mixer MP Heated Microplate Vortexer has a 2 or 4-plate format and the internal validation system monitors all parameters.
BlotBotFreedom Rocker BlotBot automated blot processors in single and double capacity models with precise timing and dispensing uses as little as 3.5 mL of antibody.
Eurostar 60EUROSTAR 60 Overhead Stirrers in digital and control models have a 40L capacity, a 0/30 to 2000 rpm and overload protection. Control model features a wireless controller.
HC SeriesHC High Capacity Cryogenic Refrigerators built with a ribbed high strength aluminum body feature a lockable lid and an optional low level alarm.
MortexerEconomical BenchMixer and Mortexer Vortex Mixers in standard or multi-head designs feature a Q-Drive Dynamic Balance System, touch or continuous operation, spill-proof electronic controls and a powerful motor.
RV 10RV 10 Basic, Digital, Control and Control Auto Rotary Evaporators for distillation of chemical processes feature an integrated heating bath and a motorized lift
BlotBoyIncubator and cold-room safe BlotBoy 3D Rocker with a 12” x 12” platform features a tri-directional motion with the optimized speed and tilt angle for all blot-related applications.
K SeriesK Series Cryostorage Freezers feature a Temperature Gradient Suppression System that improves vapor phase storage temperature and recovery. Models are ideal for extremely low temperature storage of biological samples.
Compact Digital Mini RotatorCompact Digital Mini Rotators with a 9.8” x 9.8” platform provides smooth, quiet horizontal mixing of various size tubes; models fit inside non-CO2 incubators, chambers and refrigerators (up to 60°C).
LABSLABS Cryostorage Freezer Systems have very low LN2 consumption, a turntable tabletop, hinged lid and enhanced controller; available in 371L, 698L and 1269L LN2 capacities.
VornadoTouch-activated Vornado Mini Vortex Mixer, with a compact 4” x 4” footprint, vortexes up to 50mL tubes at a fixed speed of 2800 rpm.
LD SeriesLD Series Liquid Nitrogen Dewars in 5L to 50L capacities store and dispense smaller amounts of liquid nitrogen with select models featuring a pitcher-style or beaker-style wide-mouth design.- RW 20Bestselling RW 20 digital Overhead Stirrer for basic low-volume stirring has a 20L capacity and a two-speed range motor for intensive mixing of low-viscosity or slow speed mixing of high-viscosity materials.
- EverlastIncubator and cold-room compatible Everlast 247 Rocker with an adjustable speed from 3 to 80 rpm and a 16” x 12” platform operates 24-hours a day, 7-days a week.
LocatorLocator Cryogenic Storage Systems by Thermo Fisher Scientific maximize long-term storage and simplify sample retrieval by indexing samples into racks; available in four LN2 capacity sizes.
RW 28RW 28 digital Overhead Stirrer designed for high volume, intensive high speed and high torque applications has an 80L capacity, dual speed control, 60-1400 rpm and overload protection.
LS SeriesLS Series Cryogenic Refrigerators with a durable ribbed aluminum body store vials in box-type storage racks; available from 35 to 165L liquid nitrogen capacities.
Mini BioMixerBioMixer and Mini BioMixer Rockers with a 24 rpm fixed speed features a fixed-speed 3D (nutating) motion with a tilt angle of 20° ideal for moderately aggressive mixing; available in two platform sizes.
RW 47High-volume RW 47 digital Overhead Stirrer with a 200L capacity for liquids with a viscosity of up to 100,000 mPas features dual speed range, a mechanically controlled motor and overload protection.- Mini BlotBoyIncubator and cold-room safe BlotBoy 3D Rocker with a 10.5 x 7.5” platform features a tri-directional motion with the optimized speed and tilt angle for all blot-related applications.
Thermo FlaskThermo-Flask Benchtop Liquid Nitrogen Containers are designed for easy pouring during workbench applications such as cold traps; Capacities up to 4.5L.
XT SeriesXT Series Extended Time Cryogenic Refrigerators have a rugged construction and an aluminum body for long-term storage of biological samples and other materials; available in low-profile and standard models.
RotatingRotating Mixer Unit includes three rotisseries for mixing different vial sizes; adjustable speed and angle can be configured for gentle or vigorous mixing applications.
Roto-MiniRoto-Mini Rotators ideal for resuspension, protein binding and nucleic acid purification.
Roto-Mini PlusRoto-Mini Plus Rotators offers the same wide range mixing capabilities as the Roto-Mini with additional features, such as variable speeds.
Roto-ThermRoto-Therm Incubated Tube Rotator by Benchmark Scientific for temperature sensitive applications feature variable speed for mix, pause and rock functions.
RotoBotRotoBot Rotating Mixers perform mixing, rotating, rolling and rocking functions using 11 preset mixing modes and feature two customizable programs; two platform sizes available.- TubeRockerTubeRocker 2D Rockers with a 12” x 4.5” platform and one-touch operation are ideal for gentle and thorough sample tube mixing; available in 20 rpm or 24 rpm models.
TubeRollerTubeRoller Tilting Rollers, available in 5- and 10-roller capacities, feature a wave effect tilt action for thorough mixing; models perform at a constant speed of 38 rpm.
MC-12Ideal for molecular biology and DNA protocols, the MC-12 High Speed Microcentrifuge by Benchmark Scientific reaches up to 16,000 xg, is cold room safe and feature a vibrant LCD display.
MC-24 TouchMC-24 Touch High Speed Microcentrifuge by Benchmark Scientific features a full color touch screen and a combination rotor for tubes and PCR strips.
MedifugeThermo Fisher's Medifuge is designed to perform routine clinical spin-downs with the flexibility to handle life science separations. Four customizable programs with three selectable deceleration profiles optimize separation.
PlateFugePlateFuge Microplate Micro Centrifuge by Benchmark Scientific features a swing out rotor for rapid spinning of droplets in PCR tubes, spill prevention and easy access of microplates; open and closed lid starts and stops unit.
- DiaphragmOil-free, low maintenance operation; for use with chemical vapors, pumps with PTFE seals; draw vacuum in desiccators or aspirate waste liquid in microbiology and cell culture
- Rotary VaneAchieves lower vacuums levels than diaphragm pumps; requires oil for operation and regular maintenance; use in more demanding applications such as glove boxes or freeze dryers
- RoughingReliable, clean, high-performing pumps for inert gases; use to initially evacuate a vacuum system; not suitable for use with corrosive, volatile or condensing vapors; does not pull full vacuum
- NoProduct DOES NOT include RS-232 Data Cable (full duplex communication protocol) that uses either DB9 or DB25 connectors
- YesProduct includes RS-232 Data Cable (full duplex communication protocol) that uses either DB9 or DB25 connectors